TP-Link TL-WR802N User Manual page 117

Chapter 5
www.tp-link.com. You can download the lastest firmware file from the
our website and upgrade the firmware to the latest version.
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to
4. Click
5. 16. 4. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
default values.
•
•
•
•
5. 16. 5. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
System Tools > Firmware
Choose File to locate the downloaded firmware file, and click Upgrade.
System Tools > Factory
Default Username: admin
Default Password: admin
Default IP Address: 192.168.0.1
Default Subnet Mask: 255.255.255.0
System Tools > Backup &
search engine
Configure the Router in WISP Mode (Hotspot Mode)
Upgrade.
Defaults. Click Restore
Restore.
Support page of
to reset all settings to the
113