TP-Link TL-WR802N User Manual page 144

Chapter 6
6. 7. 7.
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
• To reboot manually
Click Reboot, and wait a few minutes for the router to rebooting.
• To reboot automatically
• Select
• Select
Downloaded from ManualsNet.com
Reboot
System Tools > Reboot.
Timeout in the drop-down list of
period (1-72hours), then the router will reboot automatically after every this
interval.
Schedule in the drop-down list of
Time when the router reboots and
search engine
Configure the Router in Access Point Mode
Enable Auto Reboot
Enable Auto Reboot
Day which to decide how often it reboots.
and specify a time
and specify the
140