TP-Link TL-WR802N User Manual page 173

Chapter 8
8. 6. 3.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
default values.
•
•
•
•
8. 6. 4.
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
Factory Defaults
System Tools > Factory
Default Username: admin
Default Password: admin
Default IP Address: 192.168.0.1
Default Subnet Mask: 255.255.255.0
Backup & Restore
System Tools > Backup &
search engine
Configure the Router in Client Mode
Defaults. Click Restore
Restore.
to reset all settings to the
169