TP-Link TL-WR802N User Manual page 81

Chapter 5
• Client Settings
•
•
•
•
•
•
•
•
•
• AP Settings
•
•
Downloaded from ManualsNet.com
- The settings of the public Wi-Fi your router is going to connect to.
SSID(to be bridged) - The SSID of the public Wi-Fi your router is going to
connect to as a client.
MAC Address(to be bridged)
is going to connect to as a client.
Lock to AP - If selected, the device's connection will be restricted to only the
network with this specific MAC address.
Scan - Click this button to search the public Wi-Fi.
Key type - Select the key type according to the public Wi-Fi's security
configuration. It is recommended that the key type is the same as the public
Wi-Fi's security type.
WEP Index - Select which of the four keys will be used if the key type is WEP
(ASCII) or WEP (HEX).
Authentication Type - Select the authorization type if the key type is WEP
(ASCII) or WEP(HEX).
Encryption - Select the encryption type is the key type is WPA-PSK or WPA2-
PSK.
Password - Enter the public Wi-Fi's password if required.
- The wireless settings of your router.
Local Wireless Network Name
strongly recommended that you change your network name (SSID). This value
is case-sensitive. For example, TEST is NOT the same as test.
Mode - You can choose the appropriate "Mixed" mode.
search engine
Configure the Router in WISP Mode (Hotspot Mode)
- The MAC address of the public Wi-Fi your router
- Enter a string of up to 32 characters. It is
77