Honda XL350R 1984 Shop Manual page 72

CYLINDER HEADNAlVES
CYLINDER HEAD COVER REMOVAL
Remove the right and left side covers.
Remove the seat and fuel tank.
Remove the engine upper hanger plates,
Remove the spark plug cap.
Disconnect the starter decompressor cable from the
lifter lever.
Remove the oil pipe bolt and sealing washers at the
cylinder head .
Remove the crankshaft hole and timing hole caps
from the left crankcase cover.
Turn the crankshaft counterclockwise and align the
"Too
mark on the alter rotor
with
the index mark
on the left crankcase cover. Verify the engine is at
T.n .C. on the compression stroke by
remolling
all
vallie covers and checking for free movement at
bOth adjusters.
If no
mOl/ement is felt, rotate the
crankshaft 360° and re-align the "T" mark .
Remove the cylinder head
cOlier bolts and cylinder
head cover.
CYLINDER HEAD COVER
DISASSEMBLY
Remove the dowel pin. valve lifter lever and spring.
6-4
ENGINE UPPER HANGER PLATE
CYLINDER HEAD COVER
VA LV E LIFTER
LEV ER
DOWEL PIN