Honda XL350R 1984 Shop Manual page 155

HANDLEBAR
REMOVAL
Remove the wire harness bands.
Remove the throttle grip,
Remove th e engine stop switch and front brake
master cylinder.
Remove the left handlebar switch.
Remove the turn signals.
Remove the left handlebar grip and clutch lever
holder.
Remolle the handlebar holder bolts and the handle-
bar.
INSTALLAT ION
Install the handlebar on the lower handlebar hold-
ers.
Align the punch mark on the handlebar with the top
of the lower holders .
Place the upper holders on the handlebar with the
punch marks facing forward.
Tighten the forward bolts first, then tighten the rear
bolts.
TORQUE: 18-30 N·m
(1.8-3.0
kg-m,
13-22 ft· lb)
CLUTCH LEVER
FRONT WHEEL/SUSPENSION/ST EER ING
WIRE BAND THROTTLE GRIP
)
' - - -
, I
ENGINE STOP SWITCH
PUNCH MARK
===
======
PUNCH MARK
12-3