Honda XL350R 1984 Shop Manual page 105

RIGHT CRANKCASE COVER
REMOVAL
Drain oil from t he engine,
Remove the rig ht side cover.
Remove the exhaust pipe.
RemOlle the kick starter pedal.
Remove the right foot peg.
Remove the rear brake pedal.
Disconnect the decompressor cable.
Remove the oil pipe bolt.
Oisconnect the clutch cable.
Remolle the bolts holding the right crankcase cover,
and
remolle
the
cOlier.
KICK STARTER NEEDLE BEAR ING
REPLACEMENT
Remove the circlip, and remove the decompressor
lifter cam, spring and lifter arm.
Remove the kick starter needle bearing with the
bearing remover.
Coat a new bearing with grease and drive it into the
right crankcase cOlier with the mark facing out.
CLUTCH /OIL PUMP/ KIC K STA RTER
DECOMPRESSOR
EXHAUST PIPE
~
CLUTCH CABLE 01 L PIPE BOLT
RIGHT CRANKCASE COVER
BEARING REMOVER, 20
mm
07936-3710600, REMOVER
HANDLE 07936-3710100,
~9"'6-37101200
DRIVER
ATTACHMENT, 24
x
26
mm
07746-00 10700 AND PILOT, 20
mm
07746- 0040500 OR PI LOT, 30
mm
07746-0040700 (U .S.A. ON L Y)
8-3