BEARING REPLACEMENT
NOTE
Always replace the bearing and race as a set.
Remove the
upper
and lower races,
using
a ball race
remover.
Drive in the upper and lower race!., using the
special
tools.
Install the bearing adjustment nut on the top end
of the steering stem to prevent
damage
to the
thread.
Remove the lower bearing and dust seal using a
punch or
driver.
Replace the dust seal with new one whenever it is
removed.
FRONT WHEEL/SUSPENSION/STEERING
BALL
RACE REMOVER
DRIVER 07749-00 10000
BEARING
AND
DUST SEAL
12-19