Honda XL350R 1984 Shop Manual page 114

CLUTCH/OIL PUMP/KICK STARTER
Place the pump plate on the sub oil pump.
Install the inner and outer rotor in the pump shaft.
Install the main oil pump body.
Tighten the screws securely.
Install the oil pump cover with screw.
OIL PUMP INSTALLATION
Make su re the oil pick up pipe is in place,
NOTE
If
the oil pick up pipe is removed, set the
washer on the left side o f the oil pipe. apply
grease
10
the O' ring, and install the pipe,
Install the O-ring.
Install the oil pump,
TORQUE: 10-14 N·m
(1 .0-1 .4 kg.m. 7-10 ft-lb)
Make sure that the inner oil pipe O·ring is in place
on the oil pump body, and position the oil pipe.
Install the dowel pin and O·ring.
Install and tighten the oil pipe bolt .
TOROUE: 8- 12 N·m
(0.8- 1.2 kQom. 6-9 ft-Ib)
8-12
DOWEL PIN
ROTORS
PUMP PLATE
MAIN OIL PUMP BODY
Oil PIPE
OI L PUMP
O:OWEl
PIN