Honda XL350R 1984 Shop Manual page 106

CLUTCH/OI L PUMP/K ICK STARTER
CLUTCH LIFTER ARM BEARING
REPLACEMENT
Pull the lifter arm out, then remove the spring.
Drive the spring pin out with the pin driver, then
remove the lifter arm.
Remove the dust seal, then remove the bearing with
the bearing remover.
Install the new bearing with the mark facing out.
Appl y grease to the bearing.
Install the dust seal and liher arm.
Inuallthe spring and spring pin.
DECOMPRESSOR LIFTER ARM
REPLACEMENT
I nstall the decompressor lifter arm, spring and the
lifter lever.
Set the circlip onto the lifter lever.
8-4
LIFTER ARM SPRING PIN BEAR ING ,15 mrn 07936-
KC10500. HANDLE 07936-3710100,
WE IG HT 07936-371 0200
OUST SEAL LIFTER ARM
BEARING
SPRING
LIFTER CAM
•
LIFTER LEVER
CIRCLI P