Honda XL350R 1984 Shop Manual page 115

DRIVE GEAR
REMOVAL
Remove the clutch (Page 8-5) and oil pump (Page
8·9).
Remove the nut and lock washer.
Remove the oil pump drive gear.
Remove the pulse rotor.
Remove the drive gear.
Remove the alternator cover and hold the flywheel
with a flywheel holder (07725-0040000).
INSTALLATION
Install the drive gear aligning the cut out with the
shaft.
Install the pulse roto r with the "OUTSIDE " mark
facing outward and the CUtout aligned with t he
shaft.
Install the oil pump drive gear on the crankshaft.
Install the lock washer with the mark "OUTS IDE"
facing out.
Hold the flywheel with the flywheel holder
(07725-0040000) or equivalent commercially
available in U.S,A.
TORQUE: 60-70 N·m
(6.0-7.0
kg-m.
43-50 ft·lb)
Install the alternator cover.
Install the oit pump (Page 8·12) and clutch (Page
8·8).
CLUTCH/O IL PUMP/ KICK STARTER
LOCK WASHER NUT OIL PUMP DR IVE GEAR
DRIVE GEAR
MARK ROTOR
OIL PUMP DRIVE GEAR
LOCK WASHER MARK
8-13