Current Detector Drift Adjustment (V2 Phase); Current Detector Drift Adjustment (W1 Phase); Current Detector Drift Adjustment (W2 Phase); Igbt Ntc Calibration - Delta Electronics AC Servo Drive ASDA-AB User Manual

Chapter 7 Servo Parameters|ASDA-AB Series
P4 - 16 COF2

Current Detector Drift Adjustment (V2 phase)

Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 0~32767
Settings:
Please see P4-15 for explanation.
P4 - 17 COF3

Current Detector Drift Adjustment (W1 phase)

Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 0~32767
Settings:
Please see P4-15 for explanation.
P4 - 18 COF4

Current Detector Drift Adjustment (W2 phase)

Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 0~32767
Settings:
Please see P4-15 for explanation.
P4 - 19 TIGB

IGBT NTC Calibration

Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 1~7
Settings:
This parameter cannot be reset.
When executing this auto adjustment, ensure to cool the servo drive to 25
7-86
Communication Addr.: 0410H
Related Section: N/A
Communication Addr.: 0411H
Related Section: N/A
Communication Addr.: 0412H
Related Section: N/A
Communication Addr.: 0413H
Related Section: N/A
o
C.
Revision January 2009