Moving Speed Setting Of 1St Position; Moving Speed Setting Of 2Nd Position; Moving Speed Setting Of 3Rd Position; Moving Speed Setting Of 4Th Position - Delta Electronics AC Servo Drive ASDA-AB User Manual

Chapter 7 Servo Parameters|ASDA-AB Series
P2 - 36 POV1

Moving Speed Setting of 1st Position

Default: 1000
Applicable Control Mode: Pr
Unit: r/min
Range: 1 ~ 5000
Settings:
When setting value of P2-36 to P2-43 is higher than 3000 r/min, please set the setting value of
P1-55 to its max. value.
P2 - 37 POV2

Moving Speed Setting of 2nd Position

Default: 1000
Applicable Control Mode: Pr
Unit: r/min
Range: 1 ~ 5000
Settings:
Please refer to P2-36.
P2 - 38 POV3

Moving Speed Setting of 3rd Position

Default: 1000
Applicable Control Mode: Pr
Unit: r/min
Range: 1 ~ 5000
Settings:
Please refer to P2-36.
P2 - 39 POV4

Moving Speed Setting of 4th Position

Default: 1000
Applicable Control Mode: Pr
Unit: r/min
Range: 1 ~ 5000
Settings:
Please refer to P2-36.
7-64
Communication Addr.: 0224H
Related Section:
Section 6.2.2
Communication Addr.: 0225H
Related Section:
Section 6.2.2
Communication Addr.: 0226H
Related Section:
Section 6.2.2
Communication Addr.: 0227H
Related Section:
Section 6.2.2
Revision January 2009