Delta Electronics AC Servo Drive ASDA-AB User Manual page 172

P0 - 05 CM2 Status Monitor 2
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 16
Settings: See P0-04 for explanation.
P0 - 06 CM3 Status Monitor 3
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 16
Settings: See P0-04 for explanation.
P0 - 07 CM4 Status Monitor 4
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 17
Settings:
Select the desired drive status through communication setting or the keypad (please refer to P0-
02). The drive status can be read from the communication address of this parameter via
communication port. If users set this parameter to 17, the status of DI signal can be read.
P0 - 08 CM5 Status Monitor 5
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 17
Settings:
Select the desired drive status through communication setting or the keypad (please refer to P0-
02). The drive status can be read from the communication address of this parameter via
communication port. If users set this parameter to 17, the status of DO signal can be read.
Revision January 2009
Chapter 7 Servo Parameters|ASDA-AB Series
Communication Addr.: 0005H
Related Section:
Section 4.3.5
Communication Addr.: 0006H
Related Section:
Section 4.3.5
Communication Addr.: 0007H
Related Section:
Section 4.3.5
Communication Addr.: 0008H
Related Section:
Section 4.3.5
7-23