Delta Electronics AC Servo Drive ASDA-AB User Manual page 53

Chapter 3 Connections and Wiring|ASDA-AB Series
Be sure to connect a diode when the drive is applied to inductive load.
(Permissible current: 40mA, Instantaneous peak current: max. 100mA)
C5: Wiring of DO signal, for the use of internal
power supply, general load
C7: Wiring of DO signal, for the use of external
power supply, general load
3-28
C6: Wiring of DO signal, for the use of internal
power supply, inductive load
C8: Wiring of DO signal, for the use of external
power supply, inductive load
Revision January 2009