Cleaning The Tension Roller - Ricoh Pro TF6251 Operating Instructions Manual

6. Daily Care and Maintenance

Cleaning the Tension Roller

If bits of media or ink are affixed to the tension roller, it may not be possible to successfully feed media
when printing. Clean the tension roller regularly.
1. Remove dust and dirt such as bits of media on the surface of the tension roller with a
duster or non-woven fabric.
2. Wipe off dirt on the tension roller by using a paper towel.
If ink is cured too hard to wipe off, use non-woven fabric that has been applied with neutral
detergent to wipe off the ink.
1
1. Tension roller
• After cleaning, check that the tension roller is dry before setting media.
Cleaning the Feed Roller
If bits of media or ink are affixed to the feed roller, it may not be possible to successfully feed media
when printing. Clean the feed roller regularly.
1. Remove dust and dirt such as bits of media on the surface of the feed roller with a duster
or non-woven fabric.
2. Wipe off dirt on the feed roller by using a paper towel.
If ink is cured too hard to wipe off, use non-woven fabric that has been applied with neutral
detergent to wipe off the ink.
82
M563IC0321