[Maintenance] Screen - Ricoh Pro TF6251 Operating Instructions Manual

2. Using Print Control
2. Multi Setting (mm)
Configure settings for multi-copy printing. See "Multicopy Printing", Operating Instructions.
3. UV Curing Control
Click to check the moving direction and power setting of UV lamp.
4. Other
Configure settings for the print-start position, multicoating of color ink, and printing a footnote, etc. For details
about multicoating, see "Multicoat Printing", Operating Instructions.
• Print Footnote: Enables footnote printing. For details about footnote settings, see "Printing a Footnote",
Operating Instructions.
• X Mirror/Y Mirror: Reverses the image towards the X or Y direction.
5. [Close]
Click to cancel the settings.
6. [Apply]
Click to apply the settings.
7. Print Pieces
Sets the re-coating frequency with color ink.
8. Print Mode
From the pull-down menu, select the print mode and print speed.
Select the print mode according to the color combination in use and required image quality.
The following are the 5 types of image quality:
• [Draft]: Used to check the layout. You can select this only if the color set is 4C.
• [Production]: Prints at high speed but the quality is lowered.
• [Standard]: Prints at standard quality and speed.
• [Quality]: Prints at high quality but the printing speed is slower.
• [High Quality]: Prints at the highest image quality at a lower speed than "Quality".
For information about the types of ink, see page 75 "List of Consumables".
For details about the selectable print modes, see page 85 "List of Print Modes".
If the color combination includes W, Cl, or Pr, it is necessary to specify the spot color setting. For details, see
"Using Spot Color to Print", RIP Settings Guide.
9. Preview screen
You can preview an image of a RIP file.

[Maintenance] Screen

Performs printing nozzle check pattern, cleaning the print heads, purging ink to check and improve ink
discharge, and each maintenance.
28