Ricoh Pro TF6251 Operating Instructions Manual page 49

16. Pull up the roll media from the back of the tension roller to above the platen.
1
1. Platen
1. Platen
How to load limp media
When loading limp media such as polyester paper, pull it out to the platen as follows:
1. Prepare a sheet cut into a strip (100 × 1000 mm) (3. 9 × 39.4 inches).
2. Attach one end of the cut sheet to the center of the platen with masking tape. Pass the
other end of the strip through from the far end of the platen.
3. Staple the left and right ends (2 stapled points) of the strip to the media.
M563IC0222
1
M563IC0113
M563IC0135
Setting Media
47