1. Getting Started
8. Power ON button
Turns on the machine. See page 35 "Turning On the Power".
Roll option control section
1. Media winding switch
When the switch is set to the left position, tension is applied to the outer winding. When the switch is set to the
right position, tension is applied to the inner winding.
2. Winding tension control knob
Adjusts the tension of the winding roll shaft.
3. Media feeding switch
When the switch is set to the left position, tension is applied to the outer winding. When the switch is set to the
right position, tension is applied to the inner winding.
4. Media fixing button
Secures the media by clamping it between the feed roller and the pinch roller.
14
3
4
1
2
M563IC0253