Ricoh Pro TF6251 Operating Instructions Manual page 24

2. Using Print Control
2. Select the language to be used on the display, and then click [OK].
3. Proceed with the installation according to the instructions displayed on the screen.
• Change the settings if necessary.
4. In the component settings, select the ink configuration and type of ink used with this
machine.
• Ink Config
Select the machine's ink configuration.
• Standard Ink Config: Standard ink configuration
• Double White Ink Config: Higher throughput with white ink
• Ink Type
Select the type of ink used with the machine.
• Ricoh Pro UV Ink GP120: RICOH Pro UV Ink Bottle GP120
5. Click [Install].
6. Connect the machine and computer via a USB cable, and then click [OK].
7. Click [Finish].
A shortcut is created on the desktop.
• If Print Control is reinstalled, any contents that have been adjusted or set will be restored to their
initial state.
• After changing the main unit's ink configuration or ink, it is necessary to change the component
setting.
• The display language in Print Control is set automatically according to the language setting of the
PC that starts up Print Control. Change the display language to display a different language other
than the one set with the PC language setting. For details, see "Changing the Display Language",
Operating Instructions.
22