Ricoh Pro TF6251 Operating Instructions Manual page 62

3. Basic Operations
8. Right-click the value for the applicable print mode.
9. For [Offset], enter the value selected in step 7, then click [OK].
10. Carry out Steps 3 to 6 again to print the inspection and adjustment patterns.
11. Compare the inspection patterns before and after adjustment to check whether the
deviation has been corrected.
If further adjustment is required, repeat Steps 7 to 11.
• Example of image before adjustment
• Example of image after adjustment (deviation corrected)
60
M563DC5002
M563IC0132