How to Use the Print Control Screen
This section describes each function of the Print Control screen. You cannot change the settings for some
functions as they have already been set to their optimum values.
• When you launch Print Control, the message "Do you want to reset carriage height?" appears. Be
sure to reset the carriage height. If you do not reset it, the software will close.
• Double-clicking the shortcut icon on the desktop will start Print Control.
Startup Screen
An icon is assigned to each function, and these icons are displayed on the Startup screen. The toolbar
and other functions are described below:
1
4
1. Function tab
Click the icon to switch to the selected screen.
2. [Exit]
Terminates the application.
3. Work area
Used to configure settings and perform printing.
4. Toolbar
Used to perform basic operations in printing preparation or in printing. See page 24 "Toolbar".
How to Use the Print Control Screen
2
3
M0DTOC5050
23