Table of Contents
Advertisement
RSTi-OM User Manual
GFK-3212A
4. After successfully changing a parameter, the IO-Link Master responds with a command
Figure 59:IO-Link Master Response
5. This message means that the IO-Link device defines the entry as an invalid setting.
Figure 60: Invalid Setting Error
7.4.2
How to Use the Interface
Use the following procedure to edit parameters using the IO-Link Device ISDU Interface - Port.
Note: You may want to verify that the Automatic Download Enable for Data Storage option on the
Configuration | IO-Link Settings page is NOT set to On as this can cause unreliable results on the
corresponding port.
1. Click the
Figure 61: IO-Link Device
2. Enter the ISDU Block Index number (decimal) that you want to edit.
3. If applicable, enter the ISDU Sub-index (decimal).
Configuring IO-Link Devices
executed notification.
+
next to the IO-Link Device ISDU Interface to open the interface.
Section 7
Jun 2021
73
Advertisement
Table of Contents
