Table of Contents
Advertisement
RSTi-OM User Manual
GFK-3212A
Editing Modbus/TCP Settings
If necessary, open the IO-Link Master web interface with your web browser using the IP address.
1. Click Configuration | Modbus/TCP.
2. Click the EDIT button for the port that you want to configure.
Figure 44: Edit Changes
Note: You can click each EDIT button and open all ports to quickly configure port parameters.
1. Make appropriate selections for the IO-Link device that you will connect to that port. You can
2. Scroll to the top of the page and click the SAVE button. Make sure that the port now displays
If it displays the SAVE and CANCEL buttons, that means that one of the parameters contains an incorrect
value. If necessary, scroll down the page, make the needed corrections, and click SAVE.
IO-Link Master Port Configuration
use the help system if you require definitions or values for the options or
Parameters
the EDIT button.
Section 6
Jun 2021
Modbus/TCP Settings
61
Advertisement
Table of Contents
