Table of Contents
Advertisement
RSTi-OM User Manual
GFK-3212A
8.6.1
Using the Menu Bar Hover Shows Submenu Option
Use this procedure to enable the Menu Bar Hover Shows Submenu option. If you enable this feature it
displays the sub-menus for a category when you hover over the category name.
For example, if you hover over Advanced, the SOFTWARE, ACCOUNTS, LOG FILES, and LICENSES sub-
menus display. You can click any sub-menu and avoid opening the default menu for a category.
1. Click Configuration | MISC.
2. Click the EDIT button.
3. Click Enable next to the Menu Bar Hover Shows Submenu option.
4. Click SAVE.
Figure 74:
8.6.2
Enable PDO Write From Attached Devices Port Page
The purpose of this feature is for a non-production type of demonstration of the IOLM. You can enable
this feature to get familiar with IO-Link or if you are commissioning a system and want to be able to
test/get familiar with devices. It allows you to interact with a PDO device that does not have a PLC
connection.
You must have set and signed into the IO-Link Master using an admin password.
Note: The PDO write will not allow writes if the IOLM has a PLC connection. This should never be
enabled in a production environment.
Use this procedure to enable PDO to write from the Attached Devices | Port page.
1. If necessary, log into the IOLM using the Administrator account.
2. Click Configuration | MISC.
3. Click the EDIT button.
4. Click Enable next to the Enable PDO Write From Attached Devices Port Page option.
5. Click the SAVE button.
6. If this will not cause an unstable environment, click the CONTINUE button.
Utilizing IOLM Features
Section 8
Jun 2021
86
Advertisement
Table of Contents
