Table of Contents
Advertisement
RSTi-OM User Manual
GFK-3212A
Figure 75: PDO Warning
8.6.3
IO-Link Test Event Generator
You can use the IO-Link Test Event Generator to send messages to an IOLM port. The generated
events are displayed in the Diagnostics | IO-Link Settings page under the Last Events field and the
Syslog. This can test a port to verify that it is functioning correctly through
1. Click Configuration | Misc.
2. Expand the IO-Link Test Event Generator.
Figure 76: IO-Link Test Event Generator
3. Select the port and type of event that you want to test.
Use the following table to determine what type of event you want to generate.
Figure 77: IO-Link Test Event Generation
Utilizing IOLM Features
Section 8
Jun 2021
87
Advertisement
Table of Contents
