Assign Ip Address Statically Using The Web Page - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A

Assign IP Address Statically Using the Web Page

You can use the following procedure to configure a static IP address. The IOLM web interface switches
to the new IP address immediately.
Note: The IOLM default IP address is: 192.168.11.202 and the subnet mask is 255.255.255.0. You
may need to change your laptop or PC IP address range to access the IOLM web interface.
1. Open a web browser and enter the IOLM IP address.
2. Click Configuration | Network.
3. Click the EDIT button.
4. If necessary, change the IP Type to static.
5. Enter an IP address, subnet mask, and gateway address.
Figure 16: Enter IP Address
Configuring
Section 3
Jun 2021
22