Mqtttopicbase/Port/N/Deviceinfo - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
12.3.4

MqttTopicBase/port/n/deviceinfo

A port deviceinfo object is published each time the communication to an IO-Link device is established
successfully. Example payloads:
MQTT Interface
"port":2,
"mode":"IOLinkInput",
"status":"Operational, PDI Valid",
"state":"Operate"
}
{
"port":5,
"mode":"IOLinkInput",
"status":"Inactive",
"state":"Init"
}
{
"port":3, "mode":"Reset",
"status":"Inactive",
"state":"None"
}
{
"port":1,
"mode":"SIOOutput",
"status":"Operational",
"state":"Reset"
}
{
"port": 4,
"vendorid": 1,
"deviceid": 1120516,
"functionid": 0,
"vendname": "Pepperl+Fuchs",
"vendtext": "www.pepperl-fuchs.com/io-link",
"prodname": "OMT300-R200-2EP-IO-V1", "prodid":
"295670-100140",
"prodtext": "Distance sensor",
"serial": "40000077249691",
Section 12
Jun 2021
119