Using Log Files; View A Log File - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
14.4

Using Log Files

The IO-Link Master provides five different log files that you can view, export, or clear:
•
•
•
•
•
•
•
•
•
14.4.1

View a Log File

Use this procedure to view a log file.
1. Open your browser and enter the IP address of the IO-Link Master.
2. Click Advanced and then LOG FILES.
3. Select the log file type from the drop-list.
4. Optionally, click the REFRESH button to get the latest information.
5. Optionally, export the log file.
Figure 106: Log Files
Troubleshooting
Syslog (system log) displays line-by-line activity records.
dmesg displays Linux kernel messages.
top displays which programs are using most of the memory and CPU.
ps displays the running programs
pnio displays PROFINET IO activity
All log files start up automatically during the startup cycle. Each log file has a size limit of
100KB. Note: Typically, log files are intended to be used by Technical Support in the event there is a
problem. You can use the following procedures to:
View a Log File
Clear a Log File
Export a Log File
Section 14
Jun 2021
149