RSTi-OM User Manual
GFK-3212A
Section 9:
This section provides information about the following Diagnostics pages:
•
•
•
•
•
9.1
IO-Link Port Diagnostics
Use the IO-Link Diagnostics page to determine the status of the IO-Link configuration.
Figure 80: IO-LINK Diagnostics
The following table provides information about the IO-Link Diagnostics page.
IO-Link Diagnostics
Port Name
Port Mode
PROFINET IO Reference Information
Using the Diagnostics Pages
IO-Link Port Diagnostics (Section 9.1)
PROFINET IO Diagnostics Page (Section 9.2)
Modbus/TCP Diagnostics (Section 9.3)
OPC UA Diagnostics Page (Section 9.4)
MQTT Diagnostic Page (Section 9.5)
This is an optional friendly port name, which can be
configured in the
Configuration | IO-Link page.
Displays the active device mode:
Reset = The port is configured to disable all functionality.
IO-Link = The port is configured to IO-Link mode.
Digital In = The port is configured to operate as a digital
input.
Digital Out = The port is configured to operate as a digital
output.
Section 9
Jun 2021
91