Configuring Mqtt - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
Password
Client ID
Request Broker
Retention
Publish Request
QoS
Subscribe Request
QoS
Topic Base Path
Don't Allow Illegal
Characters in PDI/
PDO Field Names
Client Status
Publish Interval (0
- 999999)
ISDU Write Enable
12.8

Configuring MQTT

1. Refer to the MQTT Settings table if you require definitions or values for the options.
2. If necessary, click Configuration | MQTT.
3. To configure port-level values, click the EDIT button below the port that you want to update.
4. Click the SAVE button after updating the settings.
5. Click the MQTT Configuration EDIT button.
6. Select enable from the MQTT Client Enable option dropbox.
7. Enable other options that your environment requires.
8. Scroll to the top of the page and click the SAVE button.
MQTT Interface
string
string
boolean false
at most
enum
once
at most
enum
once
string
boolean true
int 10
enum disable
Password sent to the server for authentication
Client ID sent to the server when connecting
Request that broker retains published messages
QoS level 0 requested when publishing
QoS level 0 requested when subscribing
The path prefix used for all published messages
Convert PDI/PDO field names to valid JavaScript
identifiers by replacing illegal characters with
underscores
Publishing interval (seconds) for the client status
message (0
== disable)
Enable ISDU to write.
Section 12
Jun 2021
127