Data Storage - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
You can use this procedure to set up passwords for the IOLM.
1. Open your browser and enter the IOLM IP address.
2. Click Advanced | ACCOUNTS.
Figure 64: Accounts
1. Click the ADMIN check box.
2. If applicable, enter the old password in the Old Password text box.
3. Enter the new password in the New Password text box.
4. Re-enter the password in the Confirm Password text box.
5. Optionally, click the Operator check box, enter a new password, and re-enter the password in
6. Optionally, click the User check box, enter the new password, and re-enter the password in
7. Click Apply.
8. Close the new window that displays a Password saved banner.
9. Click the Log out button on the top navigation bar.
10. Re-open the web interface by selecting the appropriate user type in the drop list and entering
8.2

Data Storage

Data storage is typically supported by IO-Link v1.1 devices. Data storage means that you can upload
parameters from an IO-Link device to the IOLM and/or download parameters from the IOLM to the IO-
Link device. This feature can be used to:
1. Quickly and easily replace a defective IO-Link device
2. Configure multiple IO-Link devices with the same parameters as fast as it takes to connect and
Utilizing IOLM Features
the Confirm Password text box.
the Confirm Password text box.
the password.
disconnect the IO-Link device
Section 8
Jun 2021
77