Opc Ua Settings Parameters - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
6.5.2

OPC UA Settings Parameters

The following table provides information about the OPC UA Setting page.
OPC UA Port CONFIG
Allow OPC UA clients to write PDO data
(Default = disable)
OPC UA CONFIGURATION
OPC UA Server Enable
(Default = disable)
Work-around for faulty OPC UA clients that
require unique browsenames
(Default = disable)
Allow OPC UA clients to write ISDU data
(Default = disable)
IO-Link Master Port Configuration
Option OPC UA Configuration Descriptions
Determines whether OPC UA clients are allowed to
write PDO data to the IO-Link devices.
This option controls whether or not the OPC UA server
runs on the IO-Link Master.
Enables an alternative set of browsenames where each
node's browsename is unique. Normally only
browsepaths are required to be unique.
Determines whether OPC UA clients are allowed to
write ISDU data to the IO-Link devices.
Section 6
Jun 2021
66