Using The Web Interface To Assign The Device Name - Emerson RSTi-OM User Manual

RSTi-OM User Manual
GFK-3212A
The configuration in the PROFINET controller in Hardware Configuration (Figure 19).
Figure 19: Device Name in HWC
3.5.2

Using the Web Interface to Assign the Device Name

You can use the Configuration | Profinet IO Settings page to assign the device name for PROFINET IO
with the IO-Link Master.
Note: Changes to the device name using the web interface takes effect immediately. It may interfere
with the communication between the device and the IO controller.
1. If necessary, open the IOLM web interface with your web browser using the IP address.
2. Click Configuration | PROFINET IO Settings.
3. Click the EDIT button.
4. Enter the PROFINET IO Device Name.
Configuring
Section 3
Jun 2021
25