Advertisement
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
Open the front-passenger door.
X
To open: pull cover : outwards in the direc-
X
tion of the arrow and remove it.
To close: clip in cover : on the front of the
X
dashboard.
Fold cover : inwards until it engages.
X
Fuse box in the engine compartment
Observe the important safety notes
(
page 402).
Y
G
WARNING
When the bonnet is open, and the windscreen
wipers are set in motion, you can be injured by
the wiper linkage. There is a risk of injury.
Always switch off the windscreen wipers and
the ignition before opening the bonnet.
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
Open the bonnet (
X
Y
Remove any existing moisture from the fuse
X
box using a dry cloth.
To open: open clamps ;.
X
Fold cover : up in the direction of the arrow
X
and remove it.
To close: check whether the seal is lying cor-
X
rectly in cover :.
Insert cover : at the side of the fuse box into
X
the retainers.
Fold down cover : and close clamps ;.
X
Close the bonnet.
X
Fuse box under the rear bench seat
Observe the important safety notes
(
page 402).
Y
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses or the cover could be dam-
aged by the rear bench seat.
Electrical fuses
page 374).
Z
403
Advertisement
