Advertisement
cle. You can then no longer make calls using the
hands-free system.
If a call is active and you remove the key from
the ignition lock, the conversation is transferred
over to the mobile phone. It is then possible to
continue the conversation on the mobile phone.
Garage door opener
General notes
®
The HomeLink
garage door opener integrated
in the rear-view mirror allows you to operate up
to three different door and gate systems.
Once programmed, the integrated garage door
opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating instruc-
tions for the garage door system.
When programming a garage door opener, park
the vehicle outside the garage. Do not run the
engine while programming.
The garage door opener is only available for cer-
tain countries. Observe the legal requirements
for each individual country.
®
The HomeLink
garage door opener is compat-
ible with most European garage and gate opener
drives. More information on HomeLink
compatible products is available:
at a qualified specialist workshop
R
®
via the HomeLink
Hotline
R
(0) 08000 466 354 65 or alternatively
+49 (0) 6838 907-277
on the Internet at http://www.homelink.com
R
Important safety notes
G
WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming
Programming buttons
Pay attention to the "Important safety notes"
(
page 367).
Y
Garage door remote control A is not included
®
and/or
with the integrated garage door opener.
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Select one of buttons ; to ? to control the
X
garage door drive.
To start programming mode: press and
X
hold one of buttons ; to ? of the integrated
garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp : begins to light up yellow.
Indicator lamp : lights up yellow immedi-
ately the first time button ;, = or ? is pro-
grammed. If the selected button has already
been programmed, indicator lamp : lights
up yellow after ten seconds have elapsed.
Release button ;, = or ?. Indicator
X
lamp : flashes yellow.
To program the remote control: point
X
garage door remote control A towards but-
tons ; to ? on the rear-view mirror at a dis-
tance of 5 to 20 cm.
Features
367
Z
Advertisement
