Advertisement
Menus and submenus
292
Displaying the coolant temperature
The
Coolant
Coolant
menu is only available on PLUG-IN
HYBRID vehicles.
Observe the notes on coolant temperature
(
page 282).
Y
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Serv.
Serv.
submenu.
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Coolant
Coolant
submenu.
Press a to confirm your selection.
X
The coolant temperature is shown in a bar
display.
Settings menu
Introduction
Depending on the equipment fitted in the vehi-
cle, In the
Settings
Settings
ing options:
To change the HYBRID settings (PLUG-IN
R
HYBRID vehicles) (
To change the instrument cluster settings
R
(
page 293)
Y
To change the light settings (
R
To change the vehicle settings
R
(
page 294)
Y
To change the heating settings
R
(
page 295)
Y
To change the convenience settings
R
(
page 296)
Y
To restore the factory settings (
R
Settings
Settings
menu.
menu you have the follow-
page 292)
Y
page 293)
Y
page 297)
Y
HYBRID submenu (PLUG-IN HYBRID
vehicles)
Setting the maximum charge current
Using the
Maximum charge current
Maximum charge current
you can limit the charge current value at which
the high-voltage battery should be charged.
Before charging the high-voltage battery at a
power socket, check the maximum permissible
charge current for the relevant power socket or
the building.
Only set the maximum permissible charge cur-
rent using the function if:
it is not possible to set the charge current on
R
the charging cable
the precise maximum permitted charge cur-
R
rent can only be set via the on-board com-
puter
Before charging the high-voltage battery at a
wallbox or charging station, ensure that the
charging current is not limited by the function. If
charging at a wallbox or a charging station,
select the maximum value.
Further information on charging the high-volt-
age battery and setting the charge current
(PLUG-IN HYBRID vehicles) (
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Hybrid
Hybrid
submenu.
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Maximum charge current:
Maximum charge current:
You will see the selected setting.
Press the a button to save the setting.
X
The maximum charge current values in the on-
board computer may deviate from the charg-
ing cable values.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
page 183).
Y
Setting the departure time
You can use the "Set departure time" function to
climatise the vehicle interior before departure.
Further information on pre-entry climate control
(
page 148).
Y
If you recharge the high-voltage battery, the
function also displays the charging prediction.
function,
page 183).
Y
Settings
Settings
menu.
function.
Advertisement
