Advertisement
Display messages
322
Driving systems
Display messages
À
Attention Assist:
Attention Assist:
Take a break!
Take a break!
À
Attention Assist
Attention Assist
inoperative
inoperative
Á
Please reduce speed
Please reduce speed
Á
Compressor is cool‐
Compressor is cool‐
ing
ing
Á
Malfunction
Malfunction
Possible causes/consequences and M M Solutions
Based on certain criteria, ATTENTION ASSIST has detected fatigue or
a lack of concentration on the part of the driver. A warning tone also
sounds.
If necessary, take a break.
X
During long journeys, take regular breaks in good time so that you get
enough rest.
ATTENTION ASSIST is inoperative.
Consult a qualified specialist workshop.
X
You cannot change the vehicle level.
Possible causes:
You are driving too fast for the selected vehicle level.
R
You are driving too fast with a trailer or the trailer-coupling socket is
R
being used, e.g. for a bicycle rack.
Drive more slowly and then select the desired vehicle level again:
X
Vehicles with the Off-Road Engineering package (
R
Vehicles with the AIRMATIC package (
R
Observe the notes on towing a trailer (
X
You have selected a higher vehicle level. The compressor first needs
to cool down because of frequent level changes.
Drive in a manner appropriate for the current vehicle level.
X
Make sure that there is sufficient ground clearance.
X
Allow the compressor to cool down.
X
When the compressor has cooled down, the display message dis-
appears. The vehicle then continues rising to the selected level.
AIRMATIC is faulty.
Drive as appropriate for the current vehicle level, but do not exceed
X
80 km/h.
Make sure that there is sufficient ground clearance.
X
Consult a qualified specialist workshop.
X
page 216)
Y
page 222)
Y
page 273).
Y
Advertisement
