Advertisement
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Hybrid
Hybrid
submenu.
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Departure time:
Departure time:
function.
You will see the selected setting.
To set no departure time: press the : or
X
9 button to select
Press a to confirm.
X
If you recharge the high-voltage battery, the
multifunction display also shows the time
when the high-voltage battery will be fully
charged.
or
To set a departure time: press : or 9
X
A A
,
B B
or
C C
to select the desired preset.
Press a to confirm the selection.
X
Press : or 9 to set the hours.
X
Press a to confirm.
X
Press : or 9 to set the minutes.
X
Press a to confirm.
X
If you recharge the high-voltage battery, the
multifunction display shows the expected
charge status of the high-voltage battery for
the departure time set.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
page 183).
Y
Instrument cluster submenu
Selecting the distance unit
The
Display unit Speed-/odometer:
Display unit Speed-/odometer:
tion allows you to choose whether certain dis-
plays appear in kilometres or miles in the mul-
tifunction display.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument cluster
Instrument cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Display unit Speed-/odometer
Display unit Speed-/odometer
You will see the selected setting:
Press the a button to save the setting.
X
Settings
Settings
menu.
No
No preselection
preselection.
func-
Settings
Settings
menu.
submenu.
function.
km km
or
miles.
miles
Menus and submenus
The selected unit of measurement for distance
applies to the:
digital speedometer in the
R
total distance recorder and the trip meter
R
trip computer
R
current consumption and the range
R
navigation instructions in the
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting permanent display
United Kingdom: this function is unavailable.
The
Permanent display:
Permanent display:
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to your speedome-
ter.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument cluster
Instrument cluster
Confirm by pressing a on the steering
X
wheel.
Press the : or 9 button to select the
X
Permanent display:
Permanent display:
The current setting,
or
Dig. speedo
Dig. speedo [mph]:
[mph]:, appears.
To change the setting: press a again.
X
Light submenu
Setting the daytime driving lights
The
Daytime driving lights
Daytime driving lights
only be switched on with the engine turned off.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Daytime driving lights
Daytime driving lights
If the
Daytime driving
Daytime
driving lights
been switched on, the cone of light and the
W symbol in the multifunction display are
shown in orange.
Press the a button to save the setting.
X
Trip
Trip
menu
Navi
Navi
menu
function allows you
Settings
Settings
menu.
submenu.
function.
outside temperature
outside temperature
function can
Settings
Settings
menu.
function.
lights
function has
293
Z
Advertisement
