Advertisement
Flat tyre
390
If you come into contact with the tyre sealant,
observe the following:
Rinse off the tyre sealant from your skin
R
immediately with water.
If the tyre sealant comes into contact with
R
your eyes, immediately rinse them thor-
oughly with clean water.
If tyre sealant is swallowed, immediately
R
rinse your mouth out thoroughly and drink
plenty of water. Do not induce vomiting,
and seek medical attention immediately.
Immediately change out of clothing which
R
has come into contact with tyre sealant.
If an allergic reaction occurs, seek medical
R
attention immediately.
!
Do not operate the tyre inflation compres-
sor for longer than eight minutes at a time
without a break. It may otherwise overheat.
The tyre inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the sticker on the tyre inflation com-
pressor.
Using the TIREFIT kit
Do not remove any foreign objects which have
X
penetrated the tyre, e.g. screws or nails.
Remove the tyre sealant bottle, the accom-
X
panying TIREFIT sticker and the tyre inflation
compressor from the stowage well under-
neath the luggage compartment floor
(
page 387).
Y
Affix part : of the TIREFIT sticker to the
X
instrument cluster within the driver's field of
vision.
Affix part ; of the TIREFIT sticker near the
X
valve on the wheel with the defective tyre.
Pull plug ? with the cable and hose A out of
X
the tyre inflation compressor housing.
Screw hose A onto flange B of tyre sealant
X
bottle :.
Place tyre sealant bottle : head downwards
X
into recess ; of the tyre inflation compres-
sor.
Remove the cap from valve C on the faulty
X
tyre.
Screw filler hose D onto valve C.
X
Insert connector ? into a socket in your vehi-
X
cle.
Cigarette lighter socket: (
12 V sockets: (
page 364)
Y
Observe the notes on the cigarette lighter
(
page 364). Observe the notes on sockets
Y
(
page 364).
Y
Turn the key to position 1 in the ignition lock
X
(
page 158).
Y
page 364)
Y
Advertisement
