Advertisement
Charging the high-voltage battery
190
Problems with the charging process
Problem
The charge socket flap
cannot be opened.
The charging cable can-
not be inserted into the
vehicle socket.
The high-voltage battery
is not being charged.
Possible causes/consequences and M M Solutions
The charge socket flap is not unlocked.
Unlock the vehicle (
X
If the key battery is discharged:
Unlock the driver's door using the emergency key element
X
(
page 86).
Y
or
Unlock the vehicle centrally from the inside (
X
The charge socket flap is unlocked, but the opening mechanism is
jammed.
Lock the vehicle and unlock it again.
X
If, after that, the opening mechanism is still jammed:
Consult a qualified specialist workshop.
X
The vehicle is locked.
Unlock the vehicle (
X
The vehicle socket is locked.
Shift the transmission to position P.
X
Switch the ignition off.
X
The Ý indicator lamp on the vehicle socket flashes red.
A malfunction has occurred during the initialisation of the charging
process or during charging.
Remove the charging cable connector from the vehicle socket and
X
re-insert it into the vehicle socket.
If the problem persists:
Have the power socket checked or use another power socket.
X
or
Use a different charging station.
X
or
Consult a qualified specialist workshop.
X
Indicator lamp Ý on the vehicle socket goes out
The connection between the vehicle and the external current source
cannot be established.
Connect the charging cable again.
X
If the problem persists:
Have the power socket checked or use another power socket.
X
or
Use a different charging station.
X
or
Consult a qualified specialist workshop.
X
page 85).
Y
page 85).
Y
page 91).
Y
Advertisement
