Advertisement
Driving systems
238
Activation conditions
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° camera
R
the key is in position 2 in the ignition lock
R
the multimedia system is switched on
R
Activating the 360° camera
Press the Ø button in the centre console
X
for longer than two seconds.
The following appears depending on whether
transmission position D or R is selected:
a split-screen with top view and the image
R
from the front camera or
a split-screen with top view and the image
R
from the reversing camera
or
Press the Ø button in the centre console.
X
The vehicle menu appears.
Select
360° camera
360°
camera
X
The following appears depending on whether
transmission position D or R is selected:
a split-screen with top view and the image
R
from the front camera or
a split-screen with top view and the image
R
from the reversing camera
Switching on the 360° camera using
reverse gear
You can show images from the 360° camera
automatically by engaging reverse gear.
Make sure that the key is in position 2 in the
X
ignition lock.
Make sure that the
X
function is selected in the multimedia system
(see the separate operating instructions).
To show the 360° camera image: engage
X
reverse gear.
The multimedia system shows the area
behind the vehicle in split-screen mode. You
see the top view of the vehicle and the image
from the reversing camera.
and press 7 to confirm.
Activation by R gear
Activation by R gear
Selecting the split-screens or 180° view
Selecting split-screen view
To switch to the line with the vehicle icons:
X
slide 5 the controller.
To select one of the vehicle icons: turn 3
X
the controller.
To switch to
180° view
180°
X
troller to select
180° view
180° view
confirm.
i
The
180°
180° view
view
option is only available in the
following views:
Top view with image from the reversing
R
camera
Top view with image from the front camera
R
Displays in the multimedia system
Important safety notes
The camera system may show a distorted view
of obstacles or show them incorrectly or not at
all. Obstacles are not shown by the system in the
following locations:
under the front and rear bumpers
R
very close to the front and rear bumpers
R
in the area immediately above the tailgate
R
handle
very close to the exterior mirrors
R
in the transitional areas between the various
R
cameras in the virtual top view
!
Objects not at ground level may appear to
be further away than they actually are, e.g.:
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
R
Use the guidelines only for orientation.
Approach objects no further than the bottom-
most guideline.
view: turn 3 the con-
and press 7 to
Advertisement
