Advertisement
If manual gearshifting is deactivated, the auto-
matic transmission shifts:
into the drive program that was last selected,
R
and
into the driving mode that was last selected
R
If you change the drive program, the operating
mode that was last selected is stored for approx-
imately 60 seconds. After this time, the HYBRID
operating mode is automatically activated.
Operating the on-board computer
You can display the current operating condition
of the hybrid drive system in the multifunction
display and the multimedia system in the form of
an energy flow display (
In the display of the multimedia system, you can
also call up a graphic display of the fuel con-
sumption and generated electricity
(
page 266).
Y
Menus and submenus
Selecting displays in the display of the
multimedia system
Press the Ø button on the multimedia sys-
X
tem.
The vehicle menu appears.
To select
Energy flow
Energy
flow: turn and press the
X
controller.
The energy flow is displayed.
or
To select
Consumption: turn and press the
Consumption
X
controller.
Fuel consumption and the electric energy
generated are displayed.
To exit the display: press the % button on
X
the controller.
Selecting the energy flow display in the
multifunction display
Press the = or ; button on the steering
X
wheel to select the
Use : or 9 to select
X
Confirm by pressing a on the steering
X
wheel.
The active components of the hybrid drive
system are highlighted in the energy flow dis-
play.
page 263).
Y
Trip
Trip
menu.
Energy
Energy flow
flow.
Plug-in hybrid operation
Energy flow display
Overview
Internal combustion engine
:
Electric motor
;
Charge status of the high-voltage battery
=
High-voltage battery
?
Energy flow
A
The active components of the hybrid drive sys-
tem are highlighted.
The energy flow is indicated by arrows. The
arrows have a different colour depending on the
operating state.
Automatic engine switch-off
The internal combustion engine and the electric
motor are switched off.
The arrows for the energy flow are not shown.
The charge status of the high-voltage battery is
shown when the key is in position 2 in the igni-
tion lock.
263
Z
Advertisement
