Advertisement
loads against slipping or tipping over, e.g. by
using lashing material, even if you are using
the luggage compartment cover.
!
When loading the vehicle, make sure that
you do not stack the load in the luggage com-
partment higher than the lower edge of the
side windows. Do not place heavy objects on
top of the luggage compartment cover.
A luggage compartment cover or a combined
luggage cover and net (luggage compartment
cover with safety net) is installed, depending on
equipment, behind the rear bench seat back-
rest.
Extending and retracting the luggage
compartment cover
To extend: pull the luggage compartment
X
cover back by grab handle : and clip it into
retainers ; on the left and right.
To retract: unhook the luggage compartment
X
cover from left-hand and right-hand retain-
ers ;.
Guide the luggage compartment cover for-
X
wards using grab handle : until it is com-
pletely rolled up.
Fitting/removing luggage compart-
ment cover (without integrated safety
net)
To remove: make sure that luggage compart-
X
ment cover : is rolled up.
Push end cap = of luggage compartment :
X
in the direction of the arrow on the right or
left-hand side.
Push luggage compartment cover : into
X
opposite anchorage ;.
Remove luggage compartment cover :.
X
To fit: Insert luggage compartment cover :
X
on the right-hand side or left-hand side into
anchorage ;.
Push in opposite end cap = of luggage com-
X
partment cover : in the direction of the
arrow and insert luggage compartment
cover : into opposite anchorage ;.
Fitting/removing combined luggage
cover and net (luggage compartment
cover with integrated safety net)
You can install and remove the combined lug-
gage cover and net from the luggage compart-
ment.
Stowage areas
Z
357
Advertisement
