Advertisement
Stowage areas
358
Make sure that the safety net and the luggage
X
compartment cover are rolled up.
To remove: press button ;.
X
Swing the combined luggage cover and net in
X
the direction of the arrow.
First, detach the combined luggage cover and
X
net from left-hand catch : and then remove
it from right-hand fixture =.
To install: push the combined luggage cover
X
and net up to the stop into right-hand fixture
=.
Place the combined luggage cover and net
X
into the left-hand fixture and push it into
catch : until the combined luggage cover
and net engages audibly.
Make sure that the red lock verification indi-
X
cator ? is no longer visible. The combined
luggage cover and net will otherwise not be
locked in place.
Safety net in the combined luggage
cover and net
Important safety notes
G
WARNING
On its own, the safety net cannot secure or
restrain heavy objects, items of luggage and
heavy loads. You could be hit by an unsecured
load during sudden changes in direction,
braking or in the event of an accident. There is
an increased risk of injury or even fatal injury.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
loads against slipping or tipping over, e.g. by
using lashing material, even if you are using
the safety net.
It is important to use a safety net if you load the
vehicle with small objects above the seat backr-
ests. For safety reasons, always use a safety net
when transporting a load.
Damaged safety nets can no longer fulfil their
protective function and must be replaced. Visit a
qualified specialist workshop.
Attaching the safety net
Pull the safety net up by tab : and hook it
X
into eyelets ; using both hands.
Coat hooks on the tailgate
Coat hook
:
EASY-PACK load-securing kit
General notes
The EASY-PACK load-securing kit allows you to
use your luggage compartment for a variety of
purposes. The following accessory parts are
located under the luggage compartment floor:
Advertisement
