Advertisement
ECO display
The ECO display is not available for Mercedes-
AMG vehicles.
Press the = or ; button on the steering
X
wheel to select the
Press the 9 or : button to select
X
DISPLAY
DISPLAY.
If the ignition remains switched off for longer
than four hours, the ECO display will be auto-
matically reset.
Further information on the ECO display
(
page 194).
Y
Displaying the range and current fuel
consumption
Mercedes-AMG vehicles: the menu only dis-
plays approximate range :.
PLUG-IN HYBRID vehicles: the menu displays
current fuel consumption ;. In the subsequent
message, the multifunction display shows the
approximate electrical range as well as the total
range (
page 266).
Y
Press the = or ; button on the steering
X
wheel to select the
Press the 9 or : button to select
X
approximate range : and current fuel con-
sumption ;.
Approximate range : that can be covered is
calculated according to your current driving
style and the amount of fuel in the tank. If
there is only a small amount of fuel left in the
fuel tank, a vehicle being refuelled C
appears instead of approximate range :.
Recuperation display = shows you if energy
has been recuperated from the kinetic energy
Trip
Trip
menu.
ECO
ECO
Trip
Trip
menu.
Menus and submenus
in overrun mode and saved in the battery.
Recuperation display = depends on the
engine installed and is therefore not available
in all vehicles.
Digital speedometer
Press the = or ; button on the steering
X
wheel to select the
Press the 9 or : button to select the
X
digital speedometer.
A gearshift recommendation Z can also be
displayed.
Observe the information on gearshift recom-
mendation Z when shifting manually
(
page 172).
Y
Mercedes-AMG vehicles: a gearshift recom-
mendation is shown in the status bar of the
multifunction display and not in the digital
speedometer display.
Resetting values
Press the = or ; button on the steering
X
wheel to select the
Press the 9 or : button to select the
X
function that you wish to reset.
Press a to confirm your selection.
X
Press : to select
X
confirm.
You can reset the values of the following func-
tions:
Trip meter
R
"From start" trip computer
R
"From reset" trip computer
R
ECO display
R
Trip
Trip
menu.
Trip
Trip
menu.
Yes
Yes
and press a to
285
Z
Advertisement
