Advertisement
Display messages
320
Hybrid drive system
Display messages
d
Vehicle is opera‐
Vehicle is opera‐
tional Switch off
tional Switch off
the ignition
the
ignition before
exiting
exiting
Change the current
Change the current
drive program
drive program
before changing
before
changing the
operating
operating
modeorExit manual
mode
Exit manual
drive program M
drive program M
before changing
before
changing the
operating mode
operating mode
E-MODE currently
E-MODE currently
unavailable
unavailable
Possible causes/consequences and M M Solutions
PLUG-IN HYBRID vehicles:
You are exiting the vehicle when it is in a ready-to-drive state. The
READY indicator in the multifunction display is on. A warning tone also
sounds.
before
If you leave the vehicle:
Safeguard the vehicle against rolling away (
X
Switch off the ignition and remove the key.
X
If you do not leave the vehicle:
Switch off the electrical consumers, e.g. automatic climate control,
X
seat heating.
Please note the following: the electrical consumers are supplied by the
12 V battery. If the vehicle is left in a ready-to-drive state for an exten-
ded period, it will switch off once the 12 V battery is almost empty. It
will then only be possible to start the vehicle using a second battery
(jump-starting).
PLUG-IN HYBRID vehicles:
You have attempted to change the operating mode when in automatic
the
drive program Sport, Individual (with activated Sport characteristics)
or manual drive program M.
Select the Comfort, Slippery or Individual (with activated Comfort or
X
Eco characteristics) drive program (
the
Select the preferred operating mode HYBRID, E-MODE, E-SAVE or
X
CHARGE (
PLUG-IN HYBRID vehicles:
The charge level of the high-voltage battery has reached the lower limit
and the operating mode E-MODE has been switched off. Driving with
the internal combustion engine is activated and the operating mode
switches to the basic HYBRID setting.
Drive on using the internal combustion engine.
X
If necessary, you can change to the E-SAVE or CHARGE operating
mode (
Y
If you select the CHARGE operating mode, the high-voltage battery
is charged.
When the charge level display of the high-voltage battery has risen
a little, you can change back to the E-MODE operating mode.
page 262).
Y
page 262).
page 191).
Y
page 166).
Y
Advertisement
