Advertisement
Warning and indicator lamps in the instrument cluster
Warning/
N N Signal type
indicator
Possible causes/consequences and M M Solutions
lamp
!
N The yellow ABS warning lamp is lit while the engine is running.
PLUG-IN HYBRID vehicles:
The yellow ABS warning lamp is shown in the READY driving status.
ABS (Anti-lock Braking System) has been deactivated due to a fault. BAS (Brake
Assist), BAS PLUS with Cross-Traffic Assist, COLLISION PREVENTION ASSIST
PLUS, ESP
tronic Brake-force Distribution), PRE‑SAFE
HOLD function, hill start assist, Crosswind Assist, adaptive brake lights, STEER
CONTROL, Active Lane Keeping Assist and Active Blind Spot Assist, for example,
are therefore also deactivated.
In addition, the ÷ and å warning lamps may light up in the instrument
cluster.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the functions listed
above. The wheels could therefore lock if you brake hard, for example.
The steerability and braking characteristics may be severely affected. The braking
distance may increase in an emergency braking situation.
®
If ESP
There is an increased danger of skidding and risk of an accident.
Observe the additional display messages in the multifunction display.
X
Drive on carefully.
X
Consult a qualified specialist workshop immediately.
X
If the ABS control unit is faulty, there is also a possibility that other systems, such
as the navigation system or the automatic transmission, will be unavailable.
®
(Electronic Stability Program), ESP
is not operational, ESP
®
trailer stabilisation, EBD (Elec-
®
, PRE‑SAFE
®
is unable to stabilise the vehicle.
®
PLUS, PRE‑SAFE
®
Brake,
341
Z
Advertisement
