Advertisement
Operating the climate control system
142
THERMOTRONIC automatic climate
control
THERMOTRONIC automatic climate control zones
You can select different temperature settings
for the driver's and front-passenger sides as well
as for the rear compartment.
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
To increase or decrease temperature in
X
the front compartment: turn control : or
B anti-clockwise or clockwise (
Only change the temperature setting in small
increments. Start at 22 †.
To increase or reduce the temperature in
X
the rear compartment using the front con-
trol panel: press the á button.
The indicator lamp in the á button goes
out.
The temperature setting for the driver's side
is adopted for the rear compartment and the
front-passenger side.
Turn control : anti-clockwise or clockwise
X
(
page 138).
Y
Only change the temperature setting in small
increments. Start at 22 †.
To increase or decrease the rear compart-
X
ment temperature using the rear control
panel: turn control M anti-clockwise or
clockwise on the rear control panel
(
page 138).
Y
Only change the temperature setting in small
increments. Start at 22 †.
Setting the air distribution
Air distribution settings
Front control panel
P Directs the airflow through the centre
O Directs the airflow through the footwell
S Directs the airflow through the centre
¯ Directs the airflow through the demister
b Directs the airflow through the demister
a Directs the airflow through the footwell
_ Directs the airflow through the demister,
Rear control panel
M Directs the airflow through the centre
page 138).
O Directs the airflow through the footwell
Y
i
Using the rear control panel, you can also
activate both air distribution positions simul-
taneously. In order to do this, press both air
distribution buttons. The air is then routed
through all rear air vents.
i
Regardless of the air distribution setting,
airflow is always directed through the side air
vents. The side air vents can only be closed
when the controls on the side air vents are
turned downwards.
Setting
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Press the _ button repeatedly until the
X
desired symbol appears in the display.
Setting the airflow
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
To increase: press the K button.
X
To reduce: press the I button.
X
vents
air vents
and footwell vents
vents
and centre vents
and demister vents
centre and footwell air vents
and side air vents in the rear
air vents
Advertisement
