Advertisement
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-daz-
zle mode if the following conditions are met
simultaneously:
the ignition is switched on and
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
The mirrors do not dip if reverse gear is engaged
or if the interior lighting is switched on.
Parking position of the exterior mirror
on the front-passenger side
Setting and storing the parking position
You can set the front-passenger side exterior
mirror so that you can see the rear wheel on that
side as soon as you engage reverse gear. You
can store this position.
Using reverse gear
:
Button for the exterior mirror on the driver's
side
Button for the exterior mirror on the front-
;
passenger side
Adjustment button
=
Memory button M
?
Bring the vehicle to a standstill.
X
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Press button ; for the exterior mirror on the
X
front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the kerb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M ?. The reverse gear must not
be engaged during the process.
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Press button ; for the exterior mirror on the
X
front-passenger side.
Use adjustment button = to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the kerb.
Press memory button M ? and one of the
X
arrows on adjustment button = within three
seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
Calling up a stored parking position
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 15 km/h
R
if you press button : for the exterior mirror
R
on the driver's side
Mirrors
119
Z
Advertisement
